Tutorials

  • Modeling ×
  • Autodesk 3ds Max ×
  • ZW3D ×

Cup filler machine

erick Donald
in Modeling
2 0 Beginner
Grow stage Cup filler for Brassicas species ( seed ) #Volume fill
Autodesk 3ds Max

3ds Max Car Modelling, Surface modelling

Dimas Nugroho
in Modeling
2 0 Beginner
https://youtu.be/errXpi0NLms https://youtu.be/stn3g_gwHcg https://youtu.be/rXVZfmqBjjg https://youtu.be/_2ipAcEq-uo
Autodesk 3ds Max tutorial max 3ds modelling 3ddesign 3dsmax car

3D Modeling of a Polar Rose Using 3DS Max - Part I

Yoana Ivanova
in Modeling
2 0 Expert
PETAL CREATION PROCESS: There are two main methods for modeling the petals as follows: 1. Surface modeling method: draw a 2D surface of suitable shape using the Create > Line tool and a volume to the surface using the Shell modifier. Edge softening is achieved with MeshSmooth modifier. 2. Using Symmetry Modifier: if we are aiming for absolute symmetry of the two halves of the petal, we must use the Symmetry, but this step must precede MeshSmooth. 3. Solid modeling method: place a standard Plane primitive in the workspace (Perspective Viewport). The desired shape is obtained by selecting and moving vertices. The remaining steps of shaping the desired form are analogous to those of the method described at the beginning of the tutorial. 4. Clone the petals: using Pivot > Affect Pivot Only, where by default the pivot point is at the center of the base of the object. In this case, a total of five rows of four petals are modeled. They mus be grouped by Group so that they do not move during further work.
Autodesk 3ds Max flower rose red rose polar rose

ZW3D Tutorial - Sheet Metal - Beginner level - Exercise 2

CAD Thinkers
in Modeling
2 1 Beginner
Sheet Metal Exercise 2 - Beginners In this beginner video I will not look into the K-Factor. - Sketch and tools within the sketch environment such as: - Line - Circle - Rectangle - Mirror - Offset - Trim - Reference - Dimensions - Constraints - Extrude - Flange - Fillet - Chamfer - Unfold/Fold Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D 3dcad zw3d cad cadtutorial zw3dtutorial 3dcadmodelling 3dcaddesign sheetmetal

ZW3D Tutorial - Sheet Metal - Beginner level - Exercise 5

CAD Thinkers
in Modeling
2 0 Beginner
Sheet Metal Exercise 5 - Beginners In this beginner video I will not look into the K-Factor. I will leave k-Factors or Bend Allowance for a later stage when we start designing real world objects. *Elements used in all sketches are as follow:* - Double line - Circle - Slot - Mirror - Offset - Rectangle - Trim - Dimensions - Constraints *Elements used in 3D environment is as follow:* - Extrude/Remove - Fillet - Chamfer - Flange - Mark Bend - Unfold Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D sheetmetal 3dcaddesign 3dcadmodelling zw3dtutorial cadtutorial cad zw3d 3dcad

3D Modeling in 3D Max

malikkhan
in Modeling
2 0 Beginner
easy way to model a house 3d in max
Autodesk 3ds Max modeling 3d

ZW3D Tutorial - Surface Modelling - Intermediate level - Exercise 9

CAD Thinkers
in Modeling
1 0 Intermediate
Elements used in all sketches are as follow: - Circle - Arc - Offset - Slot - Rectangle - Dimension - Constraints - Reference Elements used in 3D environment is as follow: - Datum Plane - Wireframe: Curve List - Wireframe: Combined Projection - Shape: Extrude/Remove - Shape: Revolve - Free Form: Curve Mesh (2x) - Wireframe: Project to Face - Shape: Mirror - Free Form: N-Sided - Shape: Shell - Shape: Fillet Thanks for watching. --------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D 3dcad cadtutorial zw3dtutorial zw3d surfacemodelling 3dcadmodelling cadmodelling modelling

ZW3D Tutorial - Beginner level - Exercise 10

CAD Thinkers
in Modeling
1 1 Beginner
Exercise 10 - Beginners - Sketch and tools within the sketch environment such as: - Circles - Lines - Offset - Trim - Dimensions - Constraints - Extrude - Copy/Rotate - Chamfer Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D 3dcad modeling cadcam cad cadtutorial zw3dtutorial 3dcadmodelling 3dcaddesign

ZW3D Tutorial - Sheet Metal - Beginner level - Exercise 7

CAD Thinkers
in Modeling
1 0 Beginner
Sheet Metal Exercise 7 - Beginners In this beginner video I will not look into the K-Factor. I will leave k-Factors or Bend Allowance for a later stage when we start designing real world objects. *Elements used in all sketches are as follow:* - Double line - Draw/Line - Circle - Mirror - Offset - Trim - Dimensions - Constraints *Elements used in 3D environment is as follow:* - Extrude/Remove - Fillet - Chamfer - Parcial Flange - Face Offset Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D 3dcad zw3d cad cadtutorial zw3dtutorial 3dcadmodelling 3dcaddesign sheetmetal

ZW3D Tutorial - Sheet Metal - Beginner level - Exercise 8

CAD Thinkers
in Modeling
1 0 Beginner
Sheet Metal Exercise 8 - Beginners In this beginner video I will not look into the K-Factor. I will leave k-Factors or Bend Allowance for a later stage when we start designing real world objects. *Elements used in all sketches are as follow:* - Double line - Draw/Line - Point - Offset - Trim - Dimensions - Constraints *Elements used in 3D environment is as follow:* - Extrude - Mark Bend - Unfold - Ruled - Draft - Fold - Flange with Profile - Hole - Fillet Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D sheetmetal 3dcaddesign 3dcadmodelling zw3dtutorial cadtutorial cad zw3d 3dcad

ZW3D Tutorial - Sheet Metal - Beginner level - Exercise 9

CAD Thinkers
in Modeling
1 0 Beginner
Sheet Metal Exercise 9 - Beginners In this beginner video I will not look into the K-Factor. I will leave k-Factors or Bend Allowance for a later stage when we start designing real world objects. *Elements used in all sketches are as follow:* - Double line - Draw/Line - Constraints - Dimensions - Point - Circle - Power trim - One touch trim - Offset - Circular pattern *Elements used in 3D environment is as follow:* - Extrude/Remove - Full flange - Fillet - Hole - Louver Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D 3dcad zw3d cad cadtutorial zw3dtutorial 3dcadmodelling 3dcaddesign sheetmetal

ZW3D Computer Desk Modeling Tutorial

See Mufasu
in Modeling
1 0 Beginner
This tutorial is show you how to create 3d model computer desk with ZW3D 2020
ZW3D design modeling zw3d

Making trousers 3d max

fernando gonzalez
in Modeling
1 0 Intermediate
part 1 of this video series
Autodesk 3ds Max tutorials 3ds cloth tutorial max 3d trousers

3D Modeling and Animation of a Spherical Robot in 3DS Max - Part II

Yoana Ivanova
in Modeling
1 0 Expert
The conceptual model creation is described in the following article: IVANOVA, Ioana and Stefka NENOVA, Computer Graphics as a Means of Increasing the Quality of Military Education, Report, Sofia: Yearbook of the Military Academy, 2013, pp. 141-155; http://rnda.armf.bg/wp/wp-content/uploads/2015/03/Binder-1-322.pdf; ИВАНОВА, Йоана и Стефка НЕНОВА, Компютърната графика като средство за повишаване качеството на военното образование, Доклад, София: Годишник на Военна академия, 2013, стр. 141- 155, http://rnda.armf.bg/wp/wp-content/uploads/2015/03/Binder-1-322.pdf CREATING A GOLDEN MATERIAL: 1. Open Material Editor (hotkey "M"): the main settings of the material (ambient, diffuse, glossiness and specular level) are shown in Step 1. 2. Coloring the inner sphere: it should contrast to bring out the golden material of the outer grid. An example is given in Step 2. 3. Adding lights and shadows: this is one of the most complex stages of modeling in 3DS Max, usually done right before animating the model. It should be noted that lights can also be animated. They are selected from the main menu Create > Light. The favorite light of the author is Omni. Each of the lights can be adjusted appropriately to produce realistic shadows and highlights.
Autodesk 3ds Max aerospace engineering space infrastructure texturing gold material spherical robot

ZW3D Tutorial - Beginner level - Exercise 8

CAD Thinkers
in Modeling
1 1 Beginner
Exercise 8 - Beginners - Sketch and tools within the sketch environment such as: - Circles - Lines - Offset - Trim - Fillets - Dimensions - Constraints - Curve List - Extrude - Revolve - Pattern - Add/Combine - Fillet Thanks for watching. --------------------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D 3dcad modeling cadcam cad cadtutorial zw3dtutorial 3dcadmodelling 3dcaddesign
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.