Tutorials

  • Modeling ×
  • Tooling ×
  • Process Simulation ×

EXPORT MOTION STUDY FROM SOLIDWORKS WITH KEYSHOT PLUGIN

Angel Ramirez
in Modeling
3 0 Intermediate
The KEYSHOT PLUGIN for SOLIDWORKS offers a utility that I personally find very useful, I previously rendered my models, but any motion study or exploded view animation stayed in the SOLIDWORKS assembly, the animations were performed independently in KEYSHOT, component by component, which I find tedious, with this PLUGIN you can export your motion studies and general animations of SOLIDWORKS and render them at the moment without spending additional time. I leave a video with a clear example, I hope and it will be useful
SOLIDWORKS render study motion plugin keyshot solidworks

How to design a bicycle in Solidworks part 2 ( Body Frame i)

Gopal Kundu
in Modeling
3 0 Intermediate
https://www.youtube.com/watch?v=NHTZkuLd1jo
SOLIDWORKS mountain bicycle bike

AutoCad 3D Machine Drawing Part And Assembly Exercise Tutorials

L-Cad
in Modeling
3 0 Expert
Autocad 3D Machine Drawing Assembly Learn In easy Way. Training Video For professional Designer. See All Design To Learn to Design and assemble The Parts in Diff Ways And Methods. Check The Playlist For More Updates In all Kind Of Design Software Subscribe
AutoCAD 3d modeling plm assembly drawing machine cad autocad

SolidWorks Metallic Handle Tutorial - ARPSolidWorks

Andry Rodríguez Pérez
in Modeling
3 0 Intermediate
SolidWorks Metallic Handle Tutorial. How to make a metal handle in solidworks, explained step by step in Spanish, I hope you like it. ▶ You can leave a 👍 and subscribe here → https://goo.gl/hKNGky ▶ Activate the 🔔 to find out about all the videos.
SOLIDWORKS intermediate modeling arpsolidworks handle metallic video tutorial solidworks

SolidWorks Plastic Handle Tutorial (Part 1) - ARPSolidWorks

Andry Rodríguez Pérez
in Modeling
3 0 Intermediate
SolidWorks Plastic Handle Tutorial (Part 1). How to make a plastic handle in solidworks, explained step by step in Spanish, I hope it is to your liking. ▶ You can leave a 👍 and subscribe here → https://goo.gl/hKNGky ▶ Activate the 🔔 to find out about all the videos.
SOLIDWORKS intermediate modeling arpsolidworks handle plastic video tutorial solidworks

Cooling System of an Injection Mold

Murali K
in Tooling
3 0 Beginner
Injection Mold Cooling Design The design of the injection mold cooling system is very important. The cooling time takes up 70% to 80% of injection molding cycle, a well-designed cooling system can shorten the molding time and improve the productivity magnificently. Poor design of cooling system will extend molding time, increase production cost, and the injection mold temperature has great influence to the mold shrinkage, dimensional stability, deformation, internal stress and surface quality. So what are the factors that matter to the cooling effective? Plastic wall-thickness Part with thicker wall would need longer cooling time. Generally, the cooling time is approximately proportional to the square and the thickness of plastic parts. If possible, propose to the part designer to minimum the wall thickness. Mold steel The higher the thermal conductivity of the injection mold steel, the better for heat transferring, the shorter cooling time needs. In practice, injection mold shop usually copper to replace steel on where the cooling line is not possible to do. Cooling line layout The closer the mold cavity goes to the cooling pipes, the greater the diameter of cooling pipes, the better the cooling effect, the shorter the cooling time is going to be. The designer should look out for all the possible to get maximum cooling effect. Coolant The nature of the coolant could be different, usually used coolant are oil and water. Viscosity and thermal conductivity of the coolant also affect the heat conduction effect of the plastic injection mold. The lower cooling fluid viscosity, the higher the thermal conductivity, the lower the temperature is, the better cooling effect. Cooling system design rules: • Ensure cooling efficiency, achieve shortest the cooling line meanwhile get quality parts. • Ensure uniform cooling to avoid deformation. • Ease of manufacturing. Some examples of injection mold cooling design If possible, the number of cooling channels should be as many as possible, diameter of the cooling channel should be design as large as possible, cooling speed of A is faster than B as figure below. Diameter of cooling channel usually are 6-12mm. Cooling channels layout must be reasonable. When the wall thickness of part is uniform, the distance of each channel to the surface of parts should be even, which means the layout of channels should follow the actual geometry of the part, see figure A. When the thickness of the part is un-uniform, then thicker wall area need more cooling, see figure B, the injection mold cooling channel can be closer to the part to enhance the cooling effect. Usually temperature of the sprue gate area are highest, so the cooling start from there would achieve the best cooling effective, see figure below. Re-think cooling, that is heat removal, as "Thermal Management" and not simply "Cooling". The engineering of the Thermal System is not trivial but is often over looked. This phase of the process cycle is the longest accounting for 70-80% or more of the time. This means there is a large financial incentive to reduce this and increase profit. However, the traditional way of treating cooling as less critical discounts that dimensional stability and quality is driven during this phase. Removing parts early leads to many issues so the balance is finding the best time and the best method to optimize cooling. Look at cooling as "The goal of cooling is to remove heat from the part in an advantageous way to result in a low stressed part with the best dimensional and physical properties". Often this is treated as an even rate while in truth the cooling may need to be differential to pull the heat from difficult areas of the part as to allow for a steady state result. This requires a more thorough engineering approach including thermocouples to measure the thermal performance of the injection mold, using water circuits and manifolds to control temperatures and, perhaps, tool materials with tailored thermal properties. This list is not inclusive of a fully engineered thermal system but is a thought starter. Using this approach along with good engineering practice will go a long way of moving from designing injection molds (rule of thumb) and engineering tools (using solid practices) to getting efficient tools, improving processing margins and getting better profits.

Tutorial on PTC Creo Practice Design #12 | 3D Modeling

Ismail A Mohammed
in Modeling
3 0 Intermediate
In this PTC Creo Parametric video tutorial for beginners will guide you step by step to design the object. YouTube Channel Link : https://youtube.com/abiscaddworks
PTC Creo Parametric parametric how tutorial creo part design modeling 3d

Tutorial on PTC Creo Practice Design #13 | 3D Modeling

Ismail A Mohammed
in Modeling
3 0 Intermediate
In this PTC Creo Parametric video tutorial for beginners will guide you step by step to design the object. YouTube Channel Link : https://youtube.com/abiscaddworks
PTC Creo Parametric parametric how tutorial creo part design modeling 3d

Creo Parametric Tutorial #4 | Modifying Geometry

Ismail A Mohammed
in Modeling
3 0 Beginner
In this PTC Creo Parametric video tutorial for beginners will guide you step by step to usage of design tools in creo software. YouTube Channel Link : https://youtube.com/abiscaddworks
PTC Creo Parametric parametric how tutorial creo part design modeling 3d

Creo Parametric Tutorial #15 | Fillet & Chamfer Feature

Ismail A Mohammed
in Modeling
3 0 Beginner
In this PTC Creo Parametric video tutorial for beginners will guide you step by step to usage of design tools in creo software. YouTube Channel Link : https://youtube.com/abiscaddworks
PTC Creo Parametric parametric how tutorial creo part design modeling 3d

Tutorial on CATIA #12 | 3D Modeling

Ismail A Mohammed
in Modeling
3 0 Intermediate
Model Source : studycadcam.com Drawing : http://bit.ly/2kLvCxQ Designed Model Download Link : http://bit.ly/2kACZs0
CATIA catia 3d modeling practice design tutorial

[VIDEO] Table Design

Dono Cre'
in Modeling
3 0 Beginner
In this tutorial I will share about how to create a Futuristic Table design using the Autodesk Inventor software with various features such as; 2D Sketch, 3D Sketch, Extrude, Circullar Pattern, Fillet/Chamfer,etc.
Autodesk Inventor step inventor autodesk table tutorial design

[VIDEO] Introduction Weld Design app - CATIA 3DXP R20x

Maxime Chagnot
in Modeling
3 0 Beginner
Hello Everyone, This new video will give you an introduction to Weld Design application in CATIA 3DExperience R20x. Before doing the tutorial, you should import the Welding Resources in the platform. Watch this video to do it: https://youtu.be/5oXbP_Ht9Ho In this tutorial, you will learn how to create a Weld Bundles in an assembly and create several Weld Lines between parts. The power of this app is that the Weld lines are fully associative with you design! If you move the part in the assembly, the Weld lines will follow the position and update geometry if changes are made. Find the 3D model on this GrabCad link: https://grabcad.com/library/assembly-welded-1 Please Like, Comment, Share and Subscribe ;) * I am not an expert on Weld Symbol, so I might be wrong on the Drafting scene. I just wanted to show you the capabilities of the software. ** Special thanks to Vegar Kobbevik for helping me doing this video!
CATIA tuto lines bundles assembly welding weld 3dexperience catia

[VIDEO] Solidworks: Screws

Huy Pham
in Modeling
3 1 Beginner
I hope this video useful for everyone want to become professional design of engineer I have a channel in youtube about CAD 3D, I hope this useful for you: https://www.youtube.com/channel/UCw_Zp8rsvtI01SnhkM_4FAw
SOLIDWORKS screws tutorial solidworks

3D Scanner IR Distance Sensor

Aulia Brilian
in Modeling
3 0 Intermediate
link Youtube: https://youtu.be/_4HgfexIoIU link Blogspot: https://brilianauliaa.blogspot.com/2019/12/3d-scanner-ir-distance-sensor.html Instrumentation and Control Engineering Technology Electrical Engineering and Informatics Vocational College Gadjah Mada University 2019
SOLIDWORKS indonesia 3dprinting tools solidworks
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.