Daniel Norée

3DPrinting Designwiz

265

followers

Sthlm, Sweden

Models

Sort by: Most downloaded
OpenRC, 1:10 3D Printable RC Truggy
Awarded a Golden Gear for "Top Open Engineering Project 2013"! This an ongoing project of creating a free for all Open Source RC car that can be...
390 5359 44
OpenR/C 1:10 Formula 1 car
Please respect the license under which this project is released. Thank you! This is the OpenR/C Formula 1 car. It´s the third generation OpenR/C c...
260 2787 11
OpenRC 1:10 4WD Touring Concept RC Car (3D printable)
This i were it all started, here´s my first go at creating a printable rc car which later resulted in the OpenRC Truggy car. I learned alot from...
238 2726 27
OpenRailway EMD SW1500 1:32 Locomotive
The EMD SW 1500 is a American diesel switcher locomotive made by General Motors' Electro-Motive Division during the 60's and 70's. Some 800 were ma...
201 2211 25
Another IPhone 4 Case
Yes it´s another Iphone 4/4S Case. It´s designed with 3D printing in mind and since i don´t have an Iphone it needs some adjustments around the but...
7 1816 2
Boks Design Mini Fileserver
Back in 2006 i designed this fileserver case together with a friend as an alternative to a traditional server. It was designed to be small enough...
72 1637 11
Skateboard Trucks
NOTE: This is a concept model used for testing and a show model. Never ever use these as a replacement for the real thing! If you decide to try the...
48 1593 2
GoPro Straight Mount
GoPro Straight Mount This project is licensed under the Creative Commons - Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0): http://creativeco...
35 1379 1
OpenRC 1:10 RC Differential (3D Printable)
This is a redesigned version of the first OpenRC 1:10 RC Differential. Designed to be 3D Printed. New internal gears and lots more minor improveme...
77 1288 6
MakerBot Thing-O-Matic
3D Model of MakerBot Thing-O-Matic 3D Printer This model is a WIP and needs work to be complete.
41 1149 4
Yet another GoPro Hero 3 frame
This is a 3D Printable Hero 3 Lightweigt Frame. This project is licensed under the Creative Commons - Attribution-ShareAlike 3.0 Unported (CC BY...
27 1054 4
Makerbot 3D Printer Filament Spool
A 3D printer filament spool to help when modeling spool holders and wind-up tools.
26 950 2
Catenary mast for model railway (1:32, openRailway)
This is a catenary mast for model railways scale 1:32 (Gauge 1). It´s designed to go with the other parts i have already uploaded. Need help wi...
31 907 1
OpenRC F1 Dual Color McLaren Edition
This is a OpenRC F1 body inspired by the 2017 McLaren livery. It´s meant to be printed using dual extrusion. I have printed it using a BCN3D Sigma....
60 897 4
OpenRC Quadcopter (Beta)
This is a first go at a OpenRC Quadcopter. Read the full story here: http://3dprint.com/61174/openrc-quadcopter/ Eventhough i have now abando...
118 847 23
Lego train track, straight w support
Lego train track. Support added on the ends for 3D printing. This project is licensed under the Creative Commons - Attribution-ShareAlike 3.0 Un...
31 816 2
Fully assembled 3D printable wrench
After watching the infamous video from a few years back where Z-Corp prints a fully working wrench i decided i wanted to do the same thing on my ow...
28 737 7
GoPro Head Strap Mount
Make your own GoPro head strap mount using a 3D printer and a piece of 25mm wide elastic strap. This project is licensed under the Creative Com...
26 726 2
Lego Train Track, Curved w Support
Lego train track. Support added on the ends for 3D printing. This project is licensed under the Creative Commons - Attribution-ShareAlike 3.0 Un...
28 617 1
Model Railway Buffer Stop (1:32, OpenRailway)
I needed a simple buffer for my 3dprinted 1:32 scale railway, so that the trains don't fall of the tracks. It´s scale is 1:32, also called "Gauge...
26 592 1
Garden railway sleeper, (1:32, OpenRailway) (single)
Garden railway sleeper, scale 1:32 (single) This project is licensed under the Creative Commons - Attribution-ShareAlike 3.0 Unported (CC BY-S...
11 588 0
Z-Stage arm support brackets for Makerbot Replicator 1,2 & 2X
These are support brackets lasercut in 2mm thick aluminium that will prevent the buildplatform from sagging and vibrating which cause quality issue...
32 530 4
Handle for 1966 HD M50S
THERE IS NO LOGO OR TEXT ON THE FILES PUBLISHED! Back in the 60´s Harley Davidsson purchased 50% of Aermacchi's motorcycle division and contracted...
29 509 1
3D Printable Hinge
Another somewhat generic hinge This project is licensed under the Creative Commons - Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0): http://...
9 509 0
White Stratasys Logo White GrabCAD Logo
© 2025 Stratasys Inc.
ABOUT US
RESOURCES
Support
SOCIAL
Streamline Pro
Control
Print
Pro
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.